How to Clean Fuel Injectors

How to Clean Fuel Injectors in Your Car

Are you facing problems with your fuel injector? Do you want it to be cleaned for smooth functioning? Then you have reached the right place for all the information as this post tends to address all your queries in regards to How to Clean Fuel Injectors. You can hire a technician for this, but if you want to do it yourself, then you can always do it.

However, if you are doing it on your own, you need to make sure that you follow the correct steps to get the best results. We will focus on how to do it yourself in this post. Keep reading if you want to get a vehicle’s fuel injectors cleaning solution.

How to Clean Fuel Injectors – Supplies

Even before we start, you must remember one thing that some injectors need a replacement immediately. You need to identify which ones should be replaced and which ones to clean. Some injectors may have been clogged badly and you may need to remove them instantly. There is no point cleaning them at all and you should know it.

Again, you must refrain from using cleaning products and kits that are not approved by authorities. Using such products will only cause damage to your injector. Have a look at the supplies you need to clean your vehicle’s fuel injectors.

Injector Cleaning Kit

This is a must-have as this cleaner kit is the most important of all the cleaning supplies. You will be cleaning with this fuel injector cleaner kit and you need to make sure that it is a certified product. This will make sure that your injector remains protected and so does the environment. Yes, you must look into all this before investing in a product these days.


This connects the fuel injector, so you need to have this in place. You also need to check on the quality of this hose to make certain that it does not leak during operation. If possible run a manual check and look for seepage, before you start with your cleaning.

Gauge for Use

This is required to find out fuel pressure, which is why you need a pressure gauge at work. You will be using this gauge with the hose that gets connected to the injector.

Step By Step Instructions Of Cleaning Fuel injector

The first thing to do is to buy a fuel injector kit for this and you need to be very sure about the brand you are choosing. These fuel injector cleaning kits are often accompanied by a hose, pressure gauge, and a canister of the fuel injector. Just make sure that you select one that comes with the cleaning fluid.

Again, read the manual properly to make sure that it is compatible with your vehicle. You have nothing to worry about other than these two things. Apart from this, we have made a few pointers to help you get familiar with How To Clean Fuel Injectors. Read this section with care to get a hang of things.

Read About Engine Layout

Remember this is an important part of the whole process. You must read about the details of your engine as this will make it easy for you to handle things on your own. DIY cleaning of fuel injectors may not be easy, but if you are patient enough, you may find a way to do it by the book on your own. Look at it and then decide if you can do it.

Get the Cleaning Kit

Assuming you have invested in a quality cleaning kit, one that matches your vehicle, we would suggest that you start with your routine. Make sure that you are using the right solvent for this (like something that is recommended by your vehicle manufacturer). Now, fill the canister of your cleaning kit with this liquid.

Attach It

Yes, the next thing would be to connect to your fuel port that lies in the fuel rail. You may consult your vehicle’s manual for this, in case you don’t know where to find it. In addition to this, the kit will also have details to do this in an effortless way.

Disconnect The Fuel Pump

You can do this by consulting your manual again and removing the fuel return connection or maybe inserting a U tube to make that the gas reach the tank while you are detailing.

Disconnecting The Regulator Of Fuel Pressure

This is a must as the kit has its own pressure. You must not let that slip your mind at any cost and ensure that you disconnect this regulator.

Turn The Engine

At no cost should the fuel pump be running while you are working on cleaning the fuel injectors by turning the engine on. It will hardly take 5 to 10 minutes for the kit to start cleaning and you must take the manual into account while doing so. In fact, the engine will shut down by itself as soon as the cleaner has been used completely.

Keep The Gas Tank Open

As there would be a lot of pressure during this operation, you must leave the fuel tank cap open. This will avoid any kind of buildup in the tank and you can avoid accidents at best like this.

Check By Using Compressed Air Hose

Connect the compressed air hose to ensure that pressure levels are okay and there is no need for further adjustment.

Reverse All

Yes, by this time you are done and all you need is to reverse all the steps that you have done so far. That should not take you long as you know what to do. If not, then read the manuals and do it with care.

Start Your Car

As things get to normal, we would advise you to start ignition and listen carefully to abnormal noises. If possible drive a little and see if there is anything that is bothering you. If there is nothing, then go ahead and enjoy your drive!

You have nothing to worry as you have cleaned the dirty fuel injector with success. This certainly means, no more paying visits to the garage for this as now on you can do it on your own.

Frequently Asked Question (FAQ’s)

Why do you need to clean fuel injector?

Fuel injectors need cleaning from time to time basis, otherwise, they may get clogged injectors and that may cause low engine performance. Additionally, the smell makes it worse that makes you feel suffocated.

What to do when the vehicle starts to make a noise shifting gears?

You can try to replace the fuel filter or the fuel pump. You can also change the spark plugs as well.

How to choose the right size of a fuel injector?

There are many factors that need to be taken into consideration for this like type of diesel fuel you are using, fuel pressure, and power. Follow your manufacturer’s guidelines for this or you can even find a lot of fuel injector calculators online to do this.

Is it safe to drive with faulty fuel injector?

You can, but there is no certainty that it will work in the long run. It may even damage your diesel engine and this is one of the reasons why it has to be replaced if gone severe.

Is there a need to tune the new injector?

Yes, there is a need to fine-tune your injector every time you install a new one. There are injector kits available in the market for this.

Is injector nozzles cleaning method is better than injector replacement?

Yes, injector nozzles cleaning is better than injector replacement if the injector has not gone too much bad. However, injector replacement is the only option left if injectors cannot be cleaned.

Are these cleaners expensive?

Not at all, but yes, there are some that come at a cost, yet the result that you get out of those fuel injector cleaning kit makes them worth the investment. Nonetheless, we are not asking you to buy cheap quality ones nor the most expensive kind. You may purchase whatever you feel is right for you.

Do they differ for different systems?

Yes, they do and some manufacturers even have specific types for their models. In any case, you can always find a generic diesel injector cleaner. Just make sure that they are approved by the manufacturer and it is okay to use them.

When to take it to a mechanic?

If you are not satisfied with the results or there is a constant noise in the diesel engine, then it is highly recommended that you visit a professional for this. You may not be that confident of working on this by your own, in that case, also we would request you to seek help from a mechanic that can help you with all that you need.


Of course, reaching a professional can guarantee you thorough work, but doing it on your own can provide you satisfaction. Another factor that remains true is you save a few dollars by doing it yourself. This certainly makes all the difference and you need to be very sure of what you are doing.

If you are confident enough to understand the various aspects of How to Clean Fuel Injectors, then you can do it successfully. We have answered all questions in relation to that and hope that you have liked this write-up. Do let us know about that through the comments section.

Leave a Comment

Your email address will not be published. Required fields are marked *